Lubricants

3-IN-ONE® Multi-Purpose Oil   An essential household tool since 1894, 3-IN-ONE Multi-Purpose Oil is a versatile formula that lubricates moving parts, penetrates rust, and protects tools and equipment. Its easy-to-use drip spout...

Weld-Aid Weld-Kleen HD® Anti-SpattersProduct Details:Quick drying aerosol that allows for pre-heat, higher duty cycles, and higher temperature applicationsExcellent for fixture and tooling protection.Restricted States:CA,AK,HI,PR

CRC® Knock'er Loose® Penetrating Solvents Product Details:An industrial strength, low viscosity super penetrant designed to quickly loosen and free seized, bound, or frozen fastenersQuickly permeates rust, scale, gum, grease, and corrosionNSF...

CRC® Extreme Duty Open Gear Chain LubesProduct Details:A heavy-duty, extreme pressure lubricant recommended for reducing friction & wear in harsh environmentsIt resists heat & pressure, will not wash or wear off because of weather, & will...

CRC® Inner Slide LubesProduct Details:Specially formulated to cohere to fork lift inner slide railsDesigned to lubricate, increase slide motion, and protect against rust and corrosion of fork lift inner slide railsLong lasting smooth flawless...

CRC Sta-Lube® Air Tool OilsProduct Details:A special lubricant designed for pneumatic equipment and tools is virtually colorless and odorlessPrevents rust and corrosion.

CRC Driller Red GreasesProduct Details:High compatible thickener base reduces equipment failure risk during conversion break-in processDistinctive red color makes it easy to identify during and after lubricationOffers superior protection to lubricate a...

Ideal for tapping, threading, drilling, reaming and milling ferrous metals and non-ferrous alloys. Spray directly on the work surface.Benefits: Spray will not run

Huyett Grease Fitting, Zerk, Straight, 1/8-27 PTF Spl Extra Short, Taper Thread, Steel, Zinc Yellow Trivalent, SAE J534, Check: Surface Ball, OAL: 0.66, Shank: 0.28 Standard, Drive: 7/16 Hex Overall Length A .660 in Shank Length B .280 in Minimum...

Huyett Fitting, Zerk, Straight, 1/4-18 PTF SAE Short, Taper Thread, Steel, Zinc Clear Trivalent, SAE J534, Check: Surface Ball, OAL: 0.88, Shank: 0.45 Standard, Drive: 9/16 Hex Overall Length A .880 in Shank Length B .450 in Minimum Thread...

Huyett Fitting, Zerk, 65 Angle, 1/4-18 PTF Spl Extra Short, Taper Thread, Steel, Zinc Clear Trivalent, SAE J534, Check: Surface Ball, OAL: 0.97, Shank: 0.34 Standard, Drive: 9/16 Hex Overall Length A .970 in Shank Length B .340 in Minimum Thread...

Huyett Fitting, Zerk, Straight, M10 x 1 Taper Thread, Steel, Zinc Clear Trivalent, DIN 71412, Check: Surface Ball, OAL: 16 mm, Shank: 5.5 mm Standard, Drive: 11 mm Hex Overall Length A 16.00 mm Shank Length B 5.50 mm Minimum Thread Length C 3.70...